When the 200 w wind turbine rotates at high speed, the wind wheel rotates in the plane direction. Do not stand and perform other work to prevent the blades from flying out and hurting people. Keep the battery dry and clean. Do not place metal objects on the battery pack to prevent short circuit. Do not place the negative pole of the electrical box and the single-purpose inverter together to avoid short circuit. The inverter power supply is operated according to the inverter power supply manual.
The tightening device of the cable will automatically loosen after the strong wind. After the adjustment, the wire can be locked. After each strong wind, check whether the cable is loose. If it is loose, remove it in time. 200 w wind turbines should be wired separately and should not be mixed with other lines. It is recommended to use DC power for lighting, and household appliances can use the AC power output from the inverter.
When wiring the electrical box, first connect the battery and then connect the generator output line. When disassembling, first decompose the generator output line and then disconnect the battery pack. The shutdown switch of the electrical box is usually in the power-on position, when the battery is fully charged or in the defense against severe disasters, the wind turbine is used for temporary shutdown. Only the wind turbine is slowly running to the shutdown position, and the toggle switch is not allowed to rotate at high speed. The fan must not be operated at no load to prevent high speed rotation from damaging the blade.www.titanwindturbine.com