Home > Exhibition > Content

The installation steps of the squirrel cage vertical shaft generator are analyzed.

May 12, 2018

We choose to use a squirrel-cage vertical axis wind turbines, as the small wind turbines, squirrel-cage vertical axis wind turbine installation is not complicated, as long as ready to screw, adjustable wrench tool can begin, such as the specific steps are as follows:

First, the packaging of the cage type vertical shaft wind generator is dismantled and the fan is raised. Then place the decorative ball on the top of the fan, with three 6cm large holes in the position, and insert the screws. At the same time, hold the nut between the index finger and the middle finger of the left hand, reach into the fan, lift the screw, and then screw the screw into the nut.

Then continue to hold the nut with your hand and tighten the screw with a wrench. Follow the same procedure to tighten the other two screws of the cage type vertical shaft generator and install the decorative ball. Press the upper end of the outer frame on the connecting plate of the decorative ball. For the good hole position, insert the screw into the corner and screw the nut.

It is a little difficult to screw the bottom of the outer frame and the bottom of the cage type vertical shaft wind generator with screws. It is necessary to twist the outer frame to the good screw position. Screw the bottom nut with a wrench and tighten the screw with a screwdriver.

In the same way, you need to use a wrench to fix the nuts in the outer frame of the decorative ball and tighten the screws with a wrench. Finally, repeat the above steps in the same way, and the two outer boxes of the squirrel cage vertical axis wind generator are also installed in place.

After the completion, the whole squirrel cage vertical shaft wind generator is basically installed, and can be put into use after proper debugging. Although this is a small vertical axis wind generator, it can convert wind energy into electricity at a small amount of wind to meet the demand for a specific situation. Compared to the conventional vertical axis wind turbine, its biggest advantage is simple structure, easy installation and stable operation.http://www.titanwindturbine.com/