Home > Exhibition > Content

Precautions for installation and use of 200w small wind turbine

Nov 30, 2018

When selecting an outdoor installation site for a 200w small wind turbine, it is required to have no barrier around it; the wind condition is good; the soil is hard; in the case of meeting the above requirements, it should be as close as possible to the user's residence to reduce the line loss and save the wire.

 

If the 200W small wind turbine is installed indoors, not only the layout should be reasonable; and the power controller, the direct-AC inverter power supply should be placed in an easy-to-view position; and the battery should be placed in a safe place. In addition, it is necessary to pay attention to the operation of the unit in daily use, and it is necessary to adjust and repair in time for abnormal noise and severe vibration. Lubricate and maintain once every 3 months.

 

A protection device for preventing collision of livestock should be installed around the 200w small wind turbine to avoid knocking down the generator. For pole-type cable towers, it is necessary to check whether the cables are loose, especially in places where the soil is relatively soft. Wooden piles or cement piles should be buried next to the poles for reinforcement.

 

In order to extend the service life of the 200w small wind turbine, it is also necessary to keep the external cleaning of the battery. Regularly check to prevent external short circuit; make the filling cover vent open; avoid using the battery at high temperature; check the liquid level in the battery regularly.http://www.titanwindturbine.com/