Home > Exhibition > Content

Better understanding of the structure of the 2000 w small wind turbine

Dec 27, 2018

The engine room of the 2000 w small wind turbine contains the key equipment of the wind turbine, including gearbox and generator. The maintenance personnel can enter the nacelle through the wind turbine tower. The left end of the nacelle is the wind turbine rotor, ie the rotor blades and the shaft.

 

The low-speed shaft of the 2000 w small wind turbine connects the rotor shaft to the gearbox with a conduit for the hydraulic system to activate the operation of the aerodynamic brake. To the left of the gearbox is a low speed shaft that increases the speed of the high speed shaft to 50 times the low speed shaft.

 

Rotate the nacelle with the motor so that the rotor is facing the wind. The yaw device is operated by an electronic controller that can sense the wind direction through the wind vane. Typically, a 2000 w small wind turbine will only deflect a few degrees at a time when the wind changes its direction.

 

The cooling element of the 2000 w small wind turbine contains a fan for cooling the generator. In addition, it contains an oil cooling element for cooling the oil in the gearbox. The rudder is usually a 2000 w small wind turbine with a wind direction on the horizontal axis. It is located behind the rotor and connected to the rotor. The main function is to adjust the fan steering to make the wind turbine face the wind direction; the second is to make the wind turbine head deviate from the wind direction in the case of high wind conditions, in order to reduce the speed and protect the fan.www.titanwindturbine.com